All, (Baho and Calvin especially)

   I need to get poppler-qt3 building to enable -DWITH_PDF=ON in kdegraphics. 
Right now I have kdegraphics on Arch building with:

   cmake ${srcdir}/${_svnmod} \
     -DCMAKE_INSTALL_PREFIX=${trinity_prefix} \
     -DCMAKE_VERBOSE_MAKEFILE=ON \
     -DQT_VERSION=3 \
     -DCMAKE_CXX_FLAGS="-fpermissive" \
     -DWITH_T1LIB=ON \
     -DWITH_LIBPAPER=ON \
     -DWITH_TIFF=ON \
     -DWITH_OPENEXR=ON \
     -DWITH_PAM=ON \
     -DBUILD_ALL=ON
   make

#     -DWITH_PDF=ON \ (waiting on poppler-qt3)

   poppler-qt3 was building a month or so ago, but now I'm stuck. The regular 
arch version built up until the gcc 4.6 change (or just a little before). Now on 
the regular Arch install it fails with the following error:

make[2]: Entering directory 
`/home/david/arch/pkg/bld/poppler-qt3/src/poppler-0.16.4/qt'
   CXX    poppler-document.lo
In file included from /opt/qt/include/qstringlist.h:45:0,
                  from /opt/qt/include/qcolor.h:46,
                  from /opt/qt/include/qpixmap.h:46,
                  from ./poppler-qt.h:33,
                  from poppler-document.cc:23:
/opt/qt/include/qvaluelist.h:91:13: error: 'ptrdiff_t' does not name a type
/opt/qt/include/qvaluelist.h:167:13: error: 'ptrdiff_t' does not name a type
In file included from /opt/qt/include/qstringlist.h:45:0,
                  from /opt/qt/include/qcolor.h:46,
                  from /opt/qt/include/qpixmap.h:46,
                  from ./poppler-qt.h:33,
                  from poppler-document.cc:23:
/opt/qt/include/qvaluelist.h:427:13: error: 'ptrdiff_t' does not name a type
make[2]: *** [poppler-document.lo] Error 1
make[2]: Leaving directory 
`/home/david/arch/pkg/bld/poppler-qt3/src/poppler-0.16.4/qt'
make[1]: *** [all-recursive] Error 1
make[1]: Leaving directory `/home/david/arch/pkg/bld/poppler-qt3/src/poppler-0.16.4'
make: *** [all] Error 2
==> ERROR: A failure occurred in build().
     Aborting...

   With the trinity-poppler-qt3, I had to add an export adding 
/opt/qt/lib/pkgconfig to the PKGBUILD:

   export PKG_CONFIG_PATH=/opt/qt/lib/pkgconfig:${PKG_CONFIG_PATH}

   then the build gets past the configure error of:

"configure: error: Qt development libraries not found"

   the fatal error now is:

make[2]: Entering directory 
`/home/david/tblds/trinity-poppler-qt3/src/poppler-0.16.4/qt'
   CXX    poppler-document.lo
   CXX    poppler-fontinfo.lo
   CXX    poppler-link.lo
   CXX    poppler-page.lo
In file included from poppler-page.cc:28:0:
/opt/qt/include/qimage.h: In member function 'bool 
QImageTextKeyLang::operator<(const QImageTextKeyLang&) const':
/opt/qt/include/qimage.h:61:61: warning: suggest parentheses around '&&' within 
'||' [-Wparentheses]
poppler-page.cc: In member function 'QImage Poppler::Page::renderToImage(double, 
double, bool) const':
poppler-page.cc:76:18: warning: variable 'color_ptr' set but not used 
[-Wunused-but-set-variable]
   CXX    poppler-page-transition.lo
   CXX    poppler-private.lo
   CXXLD  libpoppler-qt.la
/usr/bin/ld: cannot find -lqt-mt
collect2: ld returned 1 exit status
make[2]: *** [libpoppler-qt.la] Error 1
make[2]: Leaving directory 
`/home/david/tblds/trinity-poppler-qt3/src/poppler-0.16.4/qt'
make[1]: *** [all-recursive] Error 1
make[1]: Leaving directory 
`/home/david/tblds/trinity-poppler-qt3/src/poppler-0.16.4'
make: *** [all] Error 2
==> ERROR: A failure occurred in build().
     Aborting...

   I don't understand how there is a ld error on -lqt-mt -- it's there:

18:27 trinity:~/tblds/trinity-poppler-qt3> l /opt/qt/lib/
<snip>
-rw-r--r-- 1 root  root      809 May  5 16:01 libqt-mt.prl
lrwxrwxrwx 1 root  root       17 May  5 16:00 libqt-mt.so -> libqt-mt.so.3.3.8
lrwxrwxrwx 1 root  root       17 May  5 16:00 libqt-mt.so.3 -> libqt-mt.so.3.3.8
lrwxrwxrwx 1 root  root       17 May  5 16:00 libqt-mt.so.3.3 -> libqt-mt.so.3.3.8
-rwxr-xr-x 1 root  root  8407876 May  5 16:01 libqt-mt.so.3.3.8
<snip>

   I need help sorting both out. Anybody see anything that sticks out above?

-- 
David C. Rankin, J.D.,P.E.